PM100 connects your service/caravan battery to the vehicle starter battery and ensures alternator charge prioritises the starter battery first. It protects the voltage of the starter battery so you can start your car every single time, even with a heavy load on the auxiliary. Features 10 channel fused output via screw terminals, L.E.D status indicators and charge or power supple switch.
PROJECTA 12V 20A Charger & 35A Power Supply
R5,615.65(Excl.Vat)
In Stock | Ships in one business day | FREE DELIVERY
SKU: PM100
PM100 connects your service/caravan battery to the vehicle starter battery and ensures alternator charge prioritises the starter battery first. *100A for 30mins 60A continuous.
| Range | Discount |
|---|---|
| 0 - 4 | 0% |
| 5 - 9 | 3% |
| 10 - 20 | 6% |
Technical Specs
| ELECTRICAL | |
| Grid | |
| Nominal input voltage (V) | 240±10%VAC 50/60Hz |
| Power factor | 0.95 |
| Input current at full load | 2.5A |
| Battery | |
| Starter battery | 12VDC |
| Starter battery voltage range | 12.8-16VDC |
| Service battery | 12VDC |
| Service battery voltage range | 10.5-16VDC |
| Charging Relay | |
| Relay Specification | 12Vdc 60A Continuous, Peak current 100A, 30min |
| Connect Voltage | 13.4VDC |
| Connection delay time | 10 sec |
| Disconnect voltage | 12.8VDC |
| Disconnect delay time | 60 sec |
| High voltage limit | 16.0VDC |
| Service Battery charger (Charger / PowerSupply switch set to OFF) |
|
| Charge Algorithms | 5 steps, soft start, bulk, absorption, float, recycle |
| Battery type | AGM |
| Start voltage | 0V |
| Bulk current | 20A |
| Absorption voltage | 14.4±0.15VDC |
| Float Voltage | 13.5±0.13VDC |
| Power supply mode (Charger/ PowerSupply switch set to ON) |
|
| Nominal output voltage | 12.8±0.2 VDC |
| Rated output current | 35A (Continuous) |
| Efficiency | 88% |
| Working temperature | -40°C~+65°C (50°C: full load; 60°C:20A;65°C: shutdown the output) |
| Battery Disconnect (LVD) | |
| Disconnect voltage | 10.5VDC |
| Delay off time | 60 sec |
| Reconnect voltage | 11.5VDC |
| Current Draw on Battery | |
| 240VAC is off, no vehicle charging | 200mA |
| LVD off, Service<10.5V current draw on battery | 60mA |
| LVD off, Service<10.0V current draw on battery | 0mA |
| Fused outputs | |
| Numbers | 10 |
| Rated current | 10Ax6;15Ax4 |
| Protection | |
| Short circuit on output | yes |
| Reverse Polarity | The fuse blown |
| Overload protection | Reduce output, until overload is removed |
| Battery charger over temperature | Battery charger shutdown |
| Battery over voltage limits | Battery Charger Disconnects, Loads Disconnect |
| PHYSICAL | |
| Dimensions (L*W*H) | 270x197x70mm |
| Weight (kg) | 2.6kgs |
| Enclosure | steel case |
| Protection category | IP20 |
| APPROVALS | |
| Insulation resistance | ≥50MΩ |
| Dielectric strength | 2KVDC/1min/1mA |
| LVD | AS/NZS 60335.2.29 |
| EMC | CISPR14 |
Features
Smart battery charger 12V 35A (20A for Charging Current)
• Multiple battery charging stages to ensure the proper charging to battery
• High efficiency, max 88%
• PFC available
Battery charging relay 12V 60A
• 60A continuously and 100A for 30mins
Battery Low Voltage Protection
• Automatic disconnection when battery voltage is lower than 10.5VDC
• Delay time is 60s
10 x Fused digital DC distributions (4 x 15A, 6 x 10A)
Thermal-controlled fan
Warranty
2-Year










