Day Returns
SSL Secure
PSI compliant
3D Secure
Secure Netcash Payments
Intelli-Start 12/24V 3000A Industrial Jump Starter
R23,494.78(Excl.Vat)
Out of Stock
• 12V 1000A / 24V 850A clamp power
• Intuitive LCD display provides real time updates
• Auto sensing 12/24V clamp connection
• IP43 rating
• Unlimited Jumpstarts
Ideal for 12V or 24V
• prime movers, buses, smaller industrial machinery as well as all passenger cars and 4WD’s.
Year Warranty
▼Additional product information & Specifications available below▼
The Intelli-Start IS3000 is a high-performance 12V and 24V industrial jump starter engineered for demanding applications such as prime movers, buses, heavy 4WDs and industrial machinery. Delivering 1000A clamp power on 12V and 850A on 24V, it provides reliable starting power where standard jump starters fall short.
Powered by advanced Lithium Iron Phosphate (LiFePO4) battery technology, the IS3000 is designed for safety, durability and long service life, offering up to 2000 charge cycles for consistent performance over time. An easy-to-read LCD display provides clear, step-by-step operating guidance, while automatic 12V/24V voltage sensing helps ensure correct connection and confident operation.
Featuring Rapid Recharge Technology, the IS3000 can replenish energy in as little as 40 seconds after a jump start by remaining connected to the vehicle battery, allowing it to be ready for the next start without waiting for a full recharge.
Built for real-world working environments, the IS3000 includes a rugged carry case with integrated cable storage and an IP43 rating for added protection. Designed to operate in temperatures as low as -20°C, it’s a dependable solution for workshops, transport fleets and on-site service applications.
*replace the existing plug with the SA plug provided.
FEATURES
- RRT Rapid Recharge Technology
Replenished discharged power in 40 seconds, when left connected to the vehicle’s battery. With our Patented Rapid Recharge Technology, the unit can quickly restore energy after use simply by remaining connected to the vehicle’s battery, so it’s ready for the next start without needing a full recharge from mains power. - Automatic Voltage Detection
Detects the vehicle’s voltage when the clamps are connected and automatically selects 12V or 24V. - Workshop Tough
Features a tough steel chassis and aluminium housing with a chemical resistant rubber overmold. Includes docking station ideal for workshop use. - LCD Colour Screen
Clear screen provides the user with information such as battery voltage and diagnostic information
DIMENSIONS + WEIGHT
 |
 |
TECHNICAL SPECS
| Battery Capacity | 2 x 6.0Ah, at 12.8V, 48,000mAh at 3.2V (153.6Wh) |
| Battery Cycles | 2000 |
| Battery Chemistry | Lithium (LiFePO4) |
| Clamp Power | 12V 1000A / 24V 850A maximum current available at the clamps |
| Peak Amps | 3000A |
| Recharging Via | 240V Charging Dock (15V 2A AC Adaptor) |
| Recharging Source | RRT via vehicle starting battery |
| Voltage | 12V and 24V |
| Operating Temperature | -20°C to 60°C |
| Operating Temp (charging) | 0°C to 45°C |
| Storage Temp (long Term) | -10°C to 45°C |
| Application | Industrial and commercial |
| Types Of Vehicle(s) | Starts large 12V 12.0L petrol & diesel vehicles, and all 24V petrol & diesel vehicles |
| Vehicle Voltage Range | 1 – 14.6V DC (12V DC Vehicle), 14.7 – 30V DC (24V DC Vehicle) |
| Jump Starter Leads – Length | Positive: 1500mm Negative: 1500mm |
| Jump Starter Leads – Cable | 50mm² / AWG 0 |
| Reverse Polarity Protection | Short-circuit, over-current, input over-voltage and under-voltage, output over-voltage and under-voltage |
| Overload Protection | MCU controlled with mechanical delay |
| Polarity Protection | MCU controlled with mechanical delay |
| No. Of Emergency Jump Starts | Unlimited with Rapid Recharge Technology® |
| IP Rating | IP54 |
Videos
FAQs
Why does my jump starter take so long to charge on the dock?
Lower charging rate extends the battery life. The built-in charging circuit provides gentle charge with cell-balancing for the internal Lithium Iron Phosphate (LiFePO4) battery.
Can the jump starter jump start vehicles at temperature lower than 0°c?
If the jump starter operates at temperatures below 0°C, its jump start rated performance will be reduced but it will start vehicles with lower clamp output requirements.
Why didn't my jump starter start my vehicle?
There could be a number of reasons why the jump starter did not start the vehicle.
Check the following:
• Ensure you have firm clamp connection to battery posts and the battery posts are clean from grease and dust build-up.
• Ensure the jump starter is fully charged. Press the POWER button to check the battery state of charge.
• Ensure you have followed the correct operating procedure. Refer to JUMP STARTING INSTRUCTIONS.
• Ensure the vehicle operates at 12V DC or 24V DC.
• If the ambient temperature is low (<15°C), the jump starter performance will be reduced. Repeat the jump start routine 1–3 times as the battery performance will improve with each concurrent jump start.
• Ensure the vehicle being jump started does not require a clamp output of greater than 1000A for 12V DC batteries and 850A for 24V DC batteries for IS3000 or 1500A for 12V DC batteries and 1000A for 24V DC batteries for IS5000 in order to jump start the vehicle.
• If possible, connect clamps as close as possible to the starter motor without going through long cables.
Check the following:
• Ensure you have firm clamp connection to battery posts and the battery posts are clean from grease and dust build-up.
• Ensure the jump starter is fully charged. Press the POWER button to check the battery state of charge.
• Ensure you have followed the correct operating procedure. Refer to JUMP STARTING INSTRUCTIONS.
• Ensure the vehicle operates at 12V DC or 24V DC.
• If the ambient temperature is low (<15°C), the jump starter performance will be reduced. Repeat the jump start routine 1–3 times as the battery performance will improve with each concurrent jump start.
• Ensure the vehicle being jump started does not require a clamp output of greater than 1000A for 12V DC batteries and 850A for 24V DC batteries for IS3000 or 1500A for 12V DC batteries and 1000A for 24V DC batteries for IS5000 in order to jump start the vehicle.
• If possible, connect clamps as close as possible to the starter motor without going through long cables.
What is peak Amps?
Peak amps is the maximum current the battery in the jump starter can produce.
What is clamp Power?
Clamp power is the maximum current available at the clamps.
Related products
R3,299.13(Excl.Vat)
SKU: IS920
R32,085.22(Excl.Vat)
SKU: IS5000HD
R8,379.13(Excl.Vat)
SKU: IS2000
R4,593.04(Excl.Vat)
SKU: IS1220